# Deploying Software

**URL:** <https://forum.pritunl.com/t/deploying-software/194>\
**Category:** Pritunl VPN\
**Tags:** pritunl-client\
**Created:** [June 15, 2022, 11:31am UTC](https://forum.pritunl.com/t/deploying-software/194 "2022-06-15T11:31:46Z")\
**Posts on this page:** 10\
**Page:** 1

<div class="post-metadata">

**Author:** ![Juans\_de](https://forum.pritunl.com/letter_avatar_proxy/v4/letter/j/a87d85/32.png) [@Juans\_de](https://forum.pritunl.com/u/Juans_de)\
**Post date:** [June 15, 2022, 11:31am UTC](https://forum.pritunl.com/t/deploying-software/194/1 "2022-06-15T11:31:46Z")

</div>

Hi guys. just lloking for the appropiate version of Pritunl.  
We are trying to deploy a Software with Lansweeper (just a new .msi pakage) to our Clients, but over the free version is not possible to reach the Clients!  
Do we need the Premium or the Enterprise Version of Pritunl?  
Do anybody has the same problems?  
Well, 10 bucks or 70, that’s the question !

J.A.

---

<div class="post-metadata">

**Author:** ![zach](https://forum.pritunl.com/user_avatar/forum.pritunl.com/zach/32/1105_2.png) [@zach](https://forum.pritunl.com/u/zach)\
**Post date:** [June 15, 2022, 2:09pm UTC](https://forum.pritunl.com/t/deploying-software/194/2 "2022-06-15T14:09:48Z")

</div>

There’s nothing preventing the Pritunl server from accessing clients, it does not require a subscription. The server with the deployment system will need to access the clients by connecting to the VPN with the clients or by routing the VPN virtual network. The firewall on the clients will need to be configured to allow access from the VPN virtual network.

---

<div class="post-metadata">

**Author:** ![Juans\_de](https://forum.pritunl.com/letter_avatar_proxy/v4/letter/j/a87d85/32.png) [@Juans\_de](https://forum.pritunl.com/u/Juans_de)\
**Post date:** [June 15, 2022, 2:45pm UTC](https://forum.pritunl.com/t/deploying-software/194/3 "2022-06-15T14:45:55Z")

</div>

Well, the point is, the Free Version let all clients to the lan over the same IP from the VPN Server.  
You cannot get to the Client directly.  
That’s why I’m asking if we need to get the Premium or Enterprise version to get directly to the clients!

J.A.

---

<div class="post-metadata">

**Author:** ![zach](https://forum.pritunl.com/user_avatar/forum.pritunl.com/zach/32/1105_2.png) [@zach](https://forum.pritunl.com/u/zach)\
**Post date:** [June 15, 2022, 3:44pm UTC](https://forum.pritunl.com/t/deploying-software/194/4 "2022-06-15T15:44:12Z")

</div>

To configure routes without NAT an enterprise subscription is required.

---

<div class="post-metadata">

**Author:** ![Juans\_de](https://forum.pritunl.com/letter_avatar_proxy/v4/letter/j/a87d85/32.png) [@Juans\_de](https://forum.pritunl.com/u/Juans_de)\
**Post date:** [June 17, 2022, 7:29am UTC](https://forum.pritunl.com/t/deploying-software/194/5 "2022-06-17T07:29:13Z")

</div>

Can I update the running Free Server Version directly to the Enterprise ? Without loosing the online Users ? Is it possible to roll back ?

J.A.

---

<div class="post-metadata">

**Author:** ![zach](https://forum.pritunl.com/user_avatar/forum.pritunl.com/zach/32/1105_2.png) [@zach](https://forum.pritunl.com/u/zach)\
**Post date:** [June 17, 2022, 8:05pm UTC](https://forum.pritunl.com/t/deploying-software/194/6 "2022-06-17T20:05:52Z")

</div>

Adding or removing a subscription will not effect the server.

---

<div class="post-metadata">

**Author:** ![Juans\_de](https://forum.pritunl.com/letter_avatar_proxy/v4/letter/j/a87d85/32.png) [@Juans\_de](https://forum.pritunl.com/u/Juans_de)\
**Post date:** [June 23, 2022, 7:07am UTC](https://forum.pritunl.com/t/deploying-software/194/7 "2022-06-23T07:07:22Z")

</div>

Hi,

I find out, we need a direct connect to some authentication Servers to keep the subscription activated.

When I open the FW, I can activate it, but I would like to setup a Rule to restrict only the Server or Group of servers to be accesse to keep the Subscrition up !

I try to find the list of serveres in the Online Dokumentation, but no chance !

The FW monitor shows these hits but not the needed port (443 ? )!

3.125.103.71.

20.106.86.13

20.43.44.165

3.73.61.193

20.223.237.241

Any suggestions ?

---

<div class="post-metadata">

**Author:** ![zach](https://forum.pritunl.com/user_avatar/forum.pritunl.com/zach/32/1105_2.png) [@zach](https://forum.pritunl.com/u/zach)\
**Post date:** [June 23, 2022, 9:07am UTC](https://forum.pritunl.com/t/deploying-software/194/8 "2022-06-23T09:07:07Z")

</div>

Pritunl will at minimum need access to the domain [app.pritunl.com](http://app.pritunl.com) on IP `129.213.195.176` to verify the subscription. The host public IPv4 and IPv6 address is automatically detected using `app4.pritunl.com` and `app6.pritunl.com`. The public IP address of the host will need to be manually configured if outbound connections are limited.

---

<div class="post-metadata">

**Author:** ![Juans\_de](https://forum.pritunl.com/letter_avatar_proxy/v4/letter/j/a87d85/32.png) [@Juans\_de](https://forum.pritunl.com/u/Juans_de)\
**Post date:** [June 23, 2022, 2:05pm UTC](https://forum.pritunl.com/t/deploying-software/194/9 "2022-06-23T14:05:06Z")

</div>

cool, now it’s up !  
Due the fact, tht we have a very unapropiate setup, we cannot reach a client . Nat bring all clients over the ip from the server!

Firewall subinterface 172.168.168.1

Pritunl Sever 172.168.168.10

Pritunl Client 172.168.168.0/22

I was planning to change the Server ip into 172…168.167.10 , also the firewall to anoter subinterface 172.168.167.1, then we will reach every client when deactivate nat.

Will these affect the clients? I don’t want to have extra work generating new .tar’s for every user !

Thks’ in advance  
J.A.

---

<div class="post-metadata">

**Author:** ![zach](https://forum.pritunl.com/user_avatar/forum.pritunl.com/zach/32/1105_2.png) [@zach](https://forum.pritunl.com/u/zach)\
**Post date:** [June 23, 2022, 5:11pm UTC](https://forum.pritunl.com/t/deploying-software/194/10 "2022-06-23T17:11:13Z")

</div>

If the clients cannot access the server IP in their configuration it will need to be imported again. If the client can access the HTTPS port on at least one of the servers in the configuration then the client configuration sync will update the configuration.
