# How to get routed ipv6 subnet?

**URL:** <https://forum.pritunl.com/t/how-to-get-routed-ipv6-subnet/304>\
**Category:** Pritunl VPN\
**Created:** [August 14, 2022, 12:23am UTC](https://forum.pritunl.com/t/how-to-get-routed-ipv6-subnet/304 "2022-08-14T00:23:52Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![lucaat](https://forum.pritunl.com/letter_avatar_proxy/v4/letter/l/9f8e36/32.png) [@lucaat](https://forum.pritunl.com/u/lucaat)\
**Post date:** [August 14, 2022, 12:23am UTC](https://forum.pritunl.com/t/how-to-get-routed-ipv6-subnet/304/1 "2022-08-14T00:23:52Z")

</div>

Hello!

I have a dedicated server from OVH it comes with a /64 ipv6 subnet.

this is my setup:  
Host system is the :: (it is a proxmox VM server) First IP of the subnet  
the first VM is ::1  
the Pritunl VM is ::2

If I connect a user to pritunl as client he gets the ::2 ipv6 as public IP.

Is there any way I can get IPs from the subnet to the clients? Or would this only be possible If I install pritunl on the Host system instead of a VM guest?

so users would get ::3 and ::4 and so on.

---

<div class="post-metadata">

**Author:** ![zach](https://forum.pritunl.com/user_avatar/forum.pritunl.com/zach/32/1105_2.png) [@zach](https://forum.pritunl.com/u/zach)\
**Post date:** [August 15, 2022, 5:38pm UTC](https://forum.pritunl.com/t/how-to-get-routed-ipv6-subnet/304/2 "2022-08-15T17:38:10Z")

</div>

The Pritunl host must have a full /64 subnet. The subnet can be set in the host settings, the same subnet can be used for the OpenVPN IPv6 subnet and WireGuard IPv6 subnet. This configuration requires an enterprise subscription.
