# Increase Network Range of Existing OpenVPN Server

**URL:** <https://forum.pritunl.com/t/increase-network-range-of-existing-openvpn-server/415>\
**Category:** Pritunl VPN\
**Created:** [September 28, 2022, 9:19am UTC](https://forum.pritunl.com/t/increase-network-range-of-existing-openvpn-server/415 "2022-09-28T09:19:37Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![blueglowey](https://forum.pritunl.com/letter_avatar_proxy/v4/letter/b/c0e974/32.png) [@blueglowey](https://forum.pritunl.com/u/blueglowey)\
**Post date:** [September 28, 2022, 9:19am UTC](https://forum.pritunl.com/t/increase-network-range-of-existing-openvpn-server/415/1 "2022-09-28T09:19:37Z")

</div>

Hi,

I have a OpenVPN Server setup on the free version of Pritunl but when setting up the server only a /24 address range was used for the Network/Virtual Network setting. I now have more than 255 users in an organisation and some of them do not have a Virtual IP listed when looking at the user information. How would I go about expanding the network range of addresses the server uses to a /23 or larger? I have many devices deployed using this server so re-issuing client configs is not possible.

Cheers

James

---

<div class="post-metadata">

**Author:** ![zach](https://forum.pritunl.com/user_avatar/forum.pritunl.com/zach/32/1105_2.png) [@zach](https://forum.pritunl.com/u/zach)\
**Post date:** [September 28, 2022, 7:39pm UTC](https://forum.pritunl.com/t/increase-network-range-of-existing-openvpn-server/415/2 "2022-09-28T19:39:38Z")

</div>

The virtual network in the server settings can be changed when the server is stopped. It will resign all user static IP addresses. No client configuration changes are required.
