# Option for full tunnel from pritunl client

**URL:** <https://forum.pritunl.com/t/option-for-full-tunnel-from-pritunl-client/732>\
**Category:** Pritunl VPN\
**Tags:** pritunl-client\
**Created:** [January 30, 2023, 9:26pm UTC](https://forum.pritunl.com/t/option-for-full-tunnel-from-pritunl-client/732 "2023-01-30T21:26:50Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![user101](https://forum.pritunl.com/letter_avatar_proxy/v4/letter/u/a9a28c/32.png) [@user101](https://forum.pritunl.com/u/user101)\
**Post date:** [January 30, 2023, 9:26pm UTC](https://forum.pritunl.com/t/option-for-full-tunnel-from-pritunl-client/732/1 "2023-01-30T21:26:50Z")

</div>

Currently, in the pritunl client there is an option under settings to “Disable Default Gateway”. This is useful if the VPN server is configured for a “full” tunnel. In this case, a user can choose this option, which will enable a split tunnel.

Our VPN server is configured for a split tunnel by default (i.e. it does not route the default route 0.0.0.0/0 vi the tunnel). However, there are cases in which a user may want to use a full tunnel. Is there a way to enable a full tunnel via the client even though the server is setup for split tunneling by default?

 ![image](https://forum-static.pritunl.com/original/1X/ea74c367603bbfeedb2a4af326aab21d36f08f2a.png)

---

<div class="post-metadata">

**Author:** ![zach](https://forum.pritunl.com/user_avatar/forum.pritunl.com/zach/32/1105_2.png) [@zach](https://forum.pritunl.com/u/zach)\
**Post date:** [January 31, 2023, 4:28pm UTC](https://forum.pritunl.com/t/option-for-full-tunnel-from-pritunl-client/732/2 "2023-01-31T16:28:11Z")

</div>

Allowing the user to add routes that don’t exist on the server would create a security issue.

---

<div class="post-metadata">

**Author:** ![user101](https://forum.pritunl.com/letter_avatar_proxy/v4/letter/u/a9a28c/32.png) [@user101](https://forum.pritunl.com/u/user101)\
**Post date:** [January 31, 2023, 4:36pm UTC](https://forum.pritunl.com/t/option-for-full-tunnel-from-pritunl-client/732/3 "2023-01-31T16:36:59Z")

</div>

Understood. Is it possible to make “Disable Default Gateway” On by default in the client?

---

<div class="post-metadata">

**Author:** ![zach](https://forum.pritunl.com/user_avatar/forum.pritunl.com/zach/32/1105_2.png) [@zach](https://forum.pritunl.com/u/zach)\
**Post date:** [January 31, 2023, 7:37pm UTC](https://forum.pritunl.com/t/option-for-full-tunnel-from-pritunl-client/732/4 "2023-01-31T19:37:50Z")

</div>

There isn’t an option to change the default.
