# Pritunl-client pin parameter

**URL:** <https://forum.pritunl.com/t/pritunl-client-pin-parameter/1087>\
**Category:** Pritunl VPN\
**Tags:** pritunl-client\
**Created:** [June 2, 2023, 6:47am UTC](https://forum.pritunl.com/t/pritunl-client-pin-parameter/1087 "2023-06-02T06:47:26Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![gdewey](https://forum.pritunl.com/user_avatar/forum.pritunl.com/gdewey/32/457_2.png) [@gdewey](https://forum.pritunl.com/u/gdewey)\
**Post date:** [June 2, 2023, 6:47am UTC](https://forum.pritunl.com/t/pritunl-client-pin-parameter/1087/1 "2023-06-02T06:47:27Z")

</div>

I am trying to connect a linux server using the client “pritunl-client” but server responds that PIN is require. The --password is equivalent to PIN ? its very confusing…

this are my arguments but I am unable to connect to the server

pritunl-client start lqeyscmd4gtfy3g7 --password=xxxxxxxx --mode=wg

how about autostart? how do I set the PIN to access on script start?

your help is appreciate it

---

<div class="post-metadata">

**Author:** ![zach](https://forum.pritunl.com/user_avatar/forum.pritunl.com/zach/32/1105_2.png) [@zach](https://forum.pritunl.com/u/zach)\
**Post date:** [June 4, 2023, 6:32pm UTC](https://forum.pritunl.com/t/pritunl-client-pin-parameter/1087/2 "2023-06-04T18:32:31Z")

</div>

The CLI profiles are intended for auto starting profiles that don’t require additional authentication. When the password is set the client should use the same password for future connections.
