# Route specific user to specific network

**URL:** <https://forum.pritunl.com/t/route-specific-user-to-specific-network/290>\
**Category:** Pritunl\
**Created:** [August 7, 2022, 8:27am UTC](https://forum.pritunl.com/t/route-specific-user-to-specific-network/290 "2022-08-07T08:27:03Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![cnbx](https://forum.pritunl.com/letter_avatar_proxy/v4/letter/c/54ee81/32.png) [@cnbx](https://forum.pritunl.com/u/cnbx)\
**Post date:** [August 7, 2022, 8:27am UTC](https://forum.pritunl.com/t/route-specific-user-to-specific-network/290/1 "2022-08-07T08:27:03Z")

</div>

hi guys,

how we create separate route for each user, for example user A only access to ip 192.168.1.0/24 and user B only for 192.168.4.0/24 i cannot fine this, please need advice

thanks.

---

<div class="post-metadata">

**Author:** ![abdullah](https://forum.pritunl.com/letter_avatar_proxy/v4/letter/a/aeb1de/32.png) [@abdullah](https://forum.pritunl.com/u/abdullah)\
**Post date:** [August 7, 2022, 9:50am UTC](https://forum.pritunl.com/t/route-specific-user-to-specific-network/290/2 "2022-08-07T09:50:20Z")

</div>

As far as I’m aware, you can’t. You need to create multiple servers within Pritunl for each subnet and control access to each server using a group, and then assign each user to the relevant group(s).

---

<div class="post-metadata">

**Author:** ![cnbx](https://forum.pritunl.com/letter_avatar_proxy/v4/letter/c/54ee81/32.png) [@cnbx](https://forum.pritunl.com/u/cnbx)\
**Post date:** [August 7, 2022, 9:59am UTC](https://forum.pritunl.com/t/route-specific-user-to-specific-network/290/3 "2022-08-07T09:59:45Z")

</div>

for free version can we do that multiple server…?

---

<div class="post-metadata">

**Author:** ![abdullah](https://forum.pritunl.com/letter_avatar_proxy/v4/letter/a/aeb1de/32.png) [@abdullah](https://forum.pritunl.com/u/abdullah)\
**Post date:** [August 7, 2022, 10:30am UTC](https://forum.pritunl.com/t/route-specific-user-to-specific-network/290/4 "2022-08-07T10:30:41Z")

</div>

Unfortunately there are not group features in free version.

With Premium version you could use ‘Organizations’ as groups, see this thread where Zach explains: [Cannot find how to set up User Groups - #4 by DingoBlue](https://forum.pritunl.com/t/cannot-find-how-to-set-up-user-groups/231/4)

---

<div class="post-metadata">

**Author:** ![cnbx](https://forum.pritunl.com/letter_avatar_proxy/v4/letter/c/54ee81/32.png) [@cnbx](https://forum.pritunl.com/u/cnbx)\
**Post date:** [August 7, 2022, 10:37am UTC](https://forum.pritunl.com/t/route-specific-user-to-specific-network/290/5 "2022-08-07T10:37:40Z")

</div>

but there is organization in free version attached to server, i think we can do that but my question is can free version deploy multiple server…?

Thanks

---

<div class="post-metadata">

**Author:** ![zach](https://forum.pritunl.com/user_avatar/forum.pritunl.com/zach/32/1105_2.png) [@zach](https://forum.pritunl.com/u/zach)\
**Post date:** [August 8, 2022, 3:27pm UTC](https://forum.pritunl.com/t/route-specific-user-to-specific-network/290/6 "2022-08-08T15:27:42Z")

</div>

Multiple servers are intended to be used for handling different sets of routes. Multiple servers can be run on a single host. Organizations are intended to function as user groups.