# Setup Pritunl Private Network Access Without NAT **URL:** \ **Category:** Pritunl VPN\ **Tags:** pritunl-client, pritunl\ **Created:** [April 20, 2023, 1:30pm UTC](https://forum.pritunl.com/t/setup-pritunl-private-network-access-without-nat/982 "2023-04-20T13:30:46Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![lozaim](https://forum.pritunl.com/user_avatar/forum.pritunl.com/lozaim/32/403_2.png) [@lozaim](https://forum.pritunl.com/u/lozaim)\ **Post date:** [April 20, 2023, 1:30pm UTC](https://forum.pritunl.com/t/setup-pritunl-private-network-access-without-nat/982/1 "2023-04-20T13:30:46Z")
![image](https://forum-static.pritunl.com/original/1X/6d66b6366cac0d5871a25f235208c1a3bf196e5e.jpeg) Hello, I need some help, I read the documentation [Accessing a Private Network](https://docs.pritunl.com/docs/accessing-a-private-network) but something went wrong, i can’t setup without NAT. How to setup Pritunl server? First case How to setup Pritunl Server (10.10.10.10.) ? I need that VPN client get ip addresses from 10.10.10.0/24 pool and this client needs access to other servers in this subnet (web or mail servers ) Or second case, I don’t found any information about bridge mode on [docs.pritunl.com](http://docs.pritunl.com) How to setup Pritunl Server(10.10.0.1) in bridge mode ? In this case VPN client get ip addresses from 10.10.0.0/24 pool and this client needs access to other servers in 10.10.10.0/24 subnet through pfsense ---
**Author:** ![razametal](https://forum.pritunl.com/letter_avatar_proxy/v4/letter/r/3da27b/32.png) [@razametal](https://forum.pritunl.com/u/razametal)\ **Post date:** [April 22, 2023, 1:38pm UTC](https://forum.pritunl.com/t/setup-pritunl-private-network-access-without-nat/982/2 "2023-04-22T13:38:13Z")
Hi, You need to forward the udp ports of the openvpn server to the interface of your VPN server. You need a different network for your VPN users (10.10.11.0/24 for example), once they are connected can have communication with your local network devices with 10.10.10.0/24 IP range. ---
**Author:** ![lozaim](https://forum.pritunl.com/user_avatar/forum.pritunl.com/lozaim/32/403_2.png) [@lozaim](https://forum.pritunl.com/u/lozaim)\ **Post date:** [April 22, 2023, 8:15pm UTC](https://forum.pritunl.com/t/setup-pritunl-private-network-access-without-nat/982/3 "2023-04-22T20:15:28Z")
Hi, thx for the reply I can Do different network but I don’t need this, I need my VPN users will be on the same network with VPN Server. In that way, I could monitor and manage VPN users traffic, because I would know and see the VPN user’s IP address. ---
**Author:** ![zach](https://forum.pritunl.com/user_avatar/forum.pritunl.com/zach/32/1105_2.png) [@zach](https://forum.pritunl.com/u/zach)\ **Post date:** [April 24, 2023, 8:42pm UTC](https://forum.pritunl.com/t/setup-pritunl-private-network-access-without-nat/982/4 "2023-04-24T20:42:32Z")
Bridged routing is not recommended the virtual VPN network should be routed instead. An enterprise subscription is required for non-NAT routes. Once NAT is disabled on the local network route the VPN virtual network must be added to the local network routing table on the router with the Pritunl server as the next hop. ---
**Author:** ![raheelfida](https://forum.pritunl.com/letter_avatar_proxy/v4/letter/r/c5a1d2/32.png) [@raheelfida](https://forum.pritunl.com/u/raheelfida)\ **Post date:** [June 2, 2024, 6:50pm UTC](https://forum.pritunl.com/t/setup-pritunl-private-network-access-without-nat/982/5 "2024-06-02T18:50:15Z")
zach, How to do that ? i too want that VPN IP of the client must be shown In the logs of the local subnet instead of NAT via local interface of pritunl . please share steps . ---
**Author:** ![raheelfida](https://forum.pritunl.com/letter_avatar_proxy/v4/letter/r/c5a1d2/32.png) [@raheelfida](https://forum.pritunl.com/u/raheelfida)\ **Post date:** [June 2, 2024, 6:51pm UTC](https://forum.pritunl.com/t/setup-pritunl-private-network-access-without-nat/982/6 "2024-06-02T18:51:45Z")
my scenerio is same as shown in picture # 1.