# Site to Site VPN to a Cisco router

**URL:** <https://forum.pritunl.com/t/site-to-site-vpn-to-a-cisco-router/1709>\
**Category:** Pritunl VPN\
**Created:** [January 19, 2024, 8:03pm UTC](https://forum.pritunl.com/t/site-to-site-vpn-to-a-cisco-router/1709 "2024-01-19T20:03:14Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![campbech1](https://forum.pritunl.com/letter_avatar_proxy/v4/letter/c/d9b06d/32.png) [@campbech1](https://forum.pritunl.com/u/campbech1)\
**Post date:** [January 19, 2024, 8:03pm UTC](https://forum.pritunl.com/t/site-to-site-vpn-to-a-cisco-router/1709/1 "2024-01-19T20:03:14Z")

</div>

Trying to setup a site to site VPN from our Pritunl Enterprise to a Cisco router. Following the steps but the “Get Config” is always blank.

Looking to pay someone for a quick setup. Is anyone interested in a quick consulting role? $100?

---

<div class="post-metadata">

**Author:** ![zach](https://forum.pritunl.com/user_avatar/forum.pritunl.com/zach/32/1105_2.png) [@zach](https://forum.pritunl.com/u/zach)\
**Post date:** [January 19, 2024, 10:41pm UTC](https://forum.pritunl.com/t/site-to-site-vpn-to-a-cisco-router/1709/2 "2024-01-19T22:41:45Z")

</div>

There must be at least two locations and at least one host in each location. The Pritunl server does not function as a host in the link, it is only used to manage the state of the link. The non-static hosts need to be configured first. Once `pritunl-link` has been started it will fill the public IP address in the state then the configurations for the static hosts can be retrieved.
